Viewed products
The DCU 305 A R1 / DCU 305 F R1 is an...
Terasaki TemBreak XH100NS - 60ACircuit Breaker 3 pole AC690V 50~60Hz
Terasaki TemBreak XH50NS – 40ACircuit Breaker 3 pole AC690V 50~60Hz
Terasaki TemBreak XE100NS – 60ACircuit Breaker 3 pole AC660V - 50~60Hz
Terasaki TemBreak XE100NS – 75ACircuit Breaker 3 pole AC660V - 50~60Hz
Terasaki TemBreak XS50NB – 40ACircuit Breaker 3 pole AC660V 50~60Hz
Terasaki TemBreak XS50NB - 50ACircuit Breaker 3 pole AC660V - 50~60Hz
Terasaki TemBreak XS100NB – 40ACircuit Breaker 3 pole AC690V - 50~60Hz
Detroit 6V-92TA
DCU_305_A_R1
Used
The DCU 305 A R1 / DCU 305 F R1 is an electronic unit for control and monitoring of diesel engines used as auxiliary or emergency gen sets.
This product is discontinued and is replaced by the DCU 305 A R2 Engine Controller or the DCU 305 R3 LT Engine Controller.
The DCU 305 A R1 / DCU 305 F R1 is an electronic unit for control and monitoring of diesel engines used as auxiliary or emergency gen sets.
The unit was also marketed as the DCU 305 only.
It has built-in communication facilities and can be expanded with remote panels. Configuration is done with a PC software. Switches and sensors from the engine are connected to the control unit on the wire terminal card RK-60.
An OEM version of this unit was made and called the CU2500 (or CU 2500) which is 100% compatible.
Different expansion modules exist to further enhance the possibilities and flexibility. The DCU 305 R1 is discontinued but the DCU 305 R2 works as a direct replacement. The DCU 305 R3 LT can also be used as a replacement, with improved configuration software, easier user interface and backwards compatible auxiliary interface units. Please inquire.
Unfortunately, no spares are available for the DCU 305 R1.