Viewed products
Sperre LL2/160 air Compressor
ABB Isomax S3Circut Breaker SACE S3N - In = 250A
Normo LDM 8
Masson Gear RSA60Ratio 1:2,061
Normo LDM 8
Mapro Soffiante-blowerType: CL 98/1 G
Brunvoll Hydraulic Power PackBPA 150 VREX A10V / 132 M
TurbochargerCallesen 427 FOT
Sperre HL2 77 start air compressor
39601-sperre-ll2-160
Used
Sperre LL2/160 air Compressor
Manufacturer | Sperre |
Model | LL2/160 |
Serial number | 165046 |
kW | 24 |
RPM | 1175 |
Volt | 440 |
m³ /h, cubic meter per hour capacity | 203 |
Electric motor type | Siemens 1LA4 207 B3 200 L |
Working pressure BAR | 8 |
Model LL2/160 is a one stage 90º V-compressor.
Cylinders and compressed air coolers are air-cooled.
Bearings and cylinders walls are splash lubricated. The compressor and motor are normally supplied mounted together and connected by means of a heavy-duty flexible coupling.
Technical Data | ||||
---|---|---|---|---|
Performance | 50 Hz (7-10 bar) | 60 Hz (30 bar) | ||
Speed (RPM) | 975 | 1475 | 1175 | |
Charging capacity (m³/h)* | 170 | 245 | 203 | |
Power requirement (kW) | 21,9 | 33,2 | 26,4 | |
Heat dissipation (kCal/h) | 16951 | 25697 | 20434 | |
*Charging capacity is from ambient pressure to final pressure. Tolerance +/-5%. | ||||
Design | ||||
No. of cylinders | 2 | |||
Cylinder arrangement | 90° V | |||
No. of compression stages | 1 | |||
Cooling | Air | |||
Valve LP | Concentric plate valves | |||
Dimensions & weight | ||||
Cylinder diameter LP | 160 mm | |||
Stroke | 100 mm | |||
Weight (compressor/el.motor) | 683 kg | |||
Lubrication | ||||
Sump capacity | 10 litres | |||
Lubrication system | Splash | |||
Operating parameters | ||||
Maximum delivery pressure | 10 bar | |||
Ambient temperature | 45°C | |||
Normal temperature outlet air | 10°C above ambient temperature | |||
Maximum speed | 1500 RPM | |||
Set point thermo switch air alarm/stop | 75°C/80°C | |||
Rotation | Anti-clockwise (looking at the drive end) | |||
Safety valves set point | 10% above stage pressure | |||
Max. noise level | 91 dBA | |||
Max. vibration level | 30 mm/s-RMS |