Air compressor

Manufacturers

Viewed products

New products

Sperre HL2/90 air Compressor

69169-sperre-hl2-90_1

Used

Sperre HL2/90 air Compressor

More details

  • Click HERE for more information
  • Product Request:


    Sperre HL2/90 air Compressor

    Sperre HL2/90 air Compressor

    Sperre HL2/90 air Compressor

    do not include special characters

    * Required fields

    Cancel 

    Data sheet

    Manufacturer Sperre
    Model HL2/90
    Serial number 90510
    m3/h, cubic meter per hour capacity 38
    Electric motor type Siemens
    Working pressure BAR 30

    More info

    Model HL2/90 is a two stage 90º V-compressor. ( typical data )

    Cylinders and compressed air coolers are air-cooled. Cooling air is supplied by a well-dimensioned fan.

    Bearings and cylinders walls are splash lubricated.

    The compressor and motor are normally supplied mounted together on a foundation, and connected by means of a heavy-duty flexible coupling.

    Technical Data
    Performance50 Hz (30 bar)60 Hz (30 bar)
    Speed (RPM) 975 1450 1175 1750
    Charging capacity (m³/h)* 24 35 28 40
    Power requirement (kW) 5,6 8,2 6,5 10,3
    Heat dissipation (kCal/h) 4334 6346 5031 7972
    *Charging capacity is from ambient pressure to final pressure. Tolerance +/-5%.
    Design
    No. of cylinders 2
    Cylinder arrangement 90° V
    No. of compression stages 2
    Cooling Air
    Cooling system Direct driven axial fan
    Valve LP Reed valve
    Valve HP Concentric plate valve
    Dimensions & weight
    Cylinder diameter LP 90 mm
    Cylinder diameter HP 50 mm
    Stroke 80 mm
    Weight (compressor/el.motor) 255 kg
    Lubrication
    Oil type Synthetic oil (see approved list)
    Sump capacity 4 litres
    Lubrication system Splash
    Operating parameters
    Maximum delivery pressure 40 bar
    Ambient temperature 45°C
    Normal working pressure LP 3–4 bar
    Normal temperature outlet air 15°C–30°C above ambient temperature
    Maximum speed 1800 RPM
    Set point thermo switch air alarm/stop 75°C/80°C
    Rotation Anti-clockwise (looking at the drive end)
    Safety valves set point 5–10% above stage pressure
    Max. noise level 84 dBA
    Max. vibration level 40 mm/s-RMS