Air compressor


Viewed products

Sperre HL2/105



Sperre HL2/105

More details

Data sheet

Serial number105636
m³ /h, cubic meter per hour capacity35
Electric motor typeABB MBT 160 M
Working pressure BAR30
Test Pressure BAR45

More info

Model HL2/105 is a two stage 90º V-compressor.

Cylinders and compressed air coolers are air-cooled. Cooling air is supplied by a well-dimensioned fan.

Bearings and cylinders walls are splash lubricated.

The compressor and motor are normally supplied mounted together on a foundationand connected by means of a heavy-duty flexible coupling.

Both electrical and diesel engine driven versions are available.

Technical Data
Performance50 Hz (30 bar)60 Hz (30 bar)
Speed (RPM)975145011751750
Charging capacity (m³/h)*30453755
Power requirement (kW)710,7914
Heat dissipation (kCal/h)54188282696610836
*Charging capacity is from ambient pressure to final pressure. Tolerance +/-5%.
No. of cylinders2
Cylinder arrangement90° V
No. of compression stages2
Cooling systemDirect driven axial fan
Valve LPReed valve
Valve HPConcentric plate valve
Dimensions & weight
Cylinder diameter LP105 mm
Cylinder diameter HP50 mm
Stroke80 mm
Weight (compressor/el.motor)283 kg
Oil typeSynthetic oil (see approved list)
Sump capacity4 litres
Lubrication systemSplash
Operating parameters
Maximum delivery pressure40 bar
Ambient temperature45°C
Normal working pressure LP4–5 bar
Normal temperature outlet air15°C–30°C above ambient temperature
Maximum speed1800 RPM
Set point thermo switch air alarm/stop75°C/80°C
RotationAnti-clockwise (looking at the drive end)
Safety valves set point5–10% above stage pressure
Max. noise level84 dBA
Max. vibration level40 mm/s-RMS