AUTO-MASKIN

Manufacturers

Viewed products

New products

Auto-Maskin DCU 110 Engine Controller (legacy)

AM1006700

New product

Auto-Maskin DCU 110 engine control unit for generator sets and propulsion engines – discontinued, replaced by DCU 305 R3 LT / DCU 210E.

More details

Price on request

or call +47 908 92 500

Data sheet

Manufacturer Auto-Maskin
Model DCU 110 (discontinued)
Manufacturers part number 1006700
Performance specification Engine control unit for propulsion engines and generator sets; start, stop, reset and standby buttons, key switch, LED indication; front IP54, rear IP30
Other Inputs: 5 switch channels, magnetic pickup, alternator, key switch, automatic start / stop signal. Built-in alarms: low battery, overspeed, engine stopped, failed to stop, start failure (3 attempts), pickup failure, alternator failure
Weight 450 g
Amps Typical 150 mA at 24 VDC
Volt 24 VDC (16-32 VDC) or 12 VDC (10-16 VDC)
Working temperature max, celsius degrees Operating and storage -20 to +70 °C, humidity below 90 %
Remarks Relays: ready to start, common alarm, reset, running (1 A at 24 VDC / 0.3 A at 125 VAC); ETS / ETR and crank (30 A at 24 VDC)
DIMENSIONs 160 x 100 x 30 mm (W x H x D); panel cut-out 135 x 95 mm, 4 x M5 bolts

More info

The DCU 110 is a compact Auto-Maskin control unit for diesel engines on generator sets and propulsion engines, from 2005. It has start, stop, reset and standby buttons, a key switch and LED indication on the front, and the engine switches, senders and magnetic pickup are wired on the rear.

  • 5 switch input channels plus magnetic pickup, alternator and automatic start/stop signal
  • Built-in alarms: low battery voltage, overspeed, engine stopped, engine failed to stop, start failure after three attempts, pickup failure and alternator failure
  • Relays for ready to start, common alarm, reset and running, and 30 A outputs for ETS / ETR and crank
  • 12 or 24 VDC, panel cut-out 135 × 95 mm, front IP54

The DCU 110 is discontinued. Current replacements are the Auto-Maskin DCU 305 R3 LT for classed installations and the Auto-Maskin DCU 210E for unclassed installations. The original installation manual with connections, configuration and schematic is in the downloads below.

We can often supply used units and spare parts, or help with the change to the current model. Contact us with your request.

Accessories

Download