> Spare parts>Electric and Electronic spare parts>Various electronic spares>CR-100V lamp current relay 100 V 40-65 W

Various electronic spares

Manufacturers

Viewed products

New products

New CR-100V lamp current relay 100 V 40-65 W — Lamp circuit 100 V View larger
Previous Next

CR-100V lamp current relay 100 V 40-65 W

CR100V4065W

New product

CR-100V current relay for 100 V 40-65 W lamp circuits, 2 changeover contacts, 8-pin plug-in.

More details

Price on request

or call +47 908 92 500

Data sheet

Model CR-100V current relay, 100 V 40-65 W lamp circuits
Other Marked CR-100V and 40~65W on case and coil. Typical use: lamp failure monitoring in navigation light panels.
Volt Lamp circuit 100 V
Contacts 2 changeover: pole 1 common 3, NC 4, NO 2; pole 2 common 6, NC 5, NO 7
Coil Current coil pins 1-8, in series with 40-65 W lamp load at 100 V
Connection / terminals 8-pin octal plug-in: coil 1-8; contacts 3-4-2 and 6-5-7 (common-NC-NO)
Mounting Plug-in, 8-pin octal relay socket

More info

Plug-in current relay marked «CR-100V» and «40~65W» on the case and on the coil. The coil is wound with few turns of heavy wire and is connected in series with a lamp load of 40-65 W at 100 V. This type is typically used for lamp failure monitoring in navigation light panels on Japanese-built ships.

Technical description

  • Current coil on pins 1-8, for 100 V lamp circuits, 40-65 W
  • 2 changeover contacts: pole 1 common 3, NC 4, NO 2; pole 2 common 6, NC 5, NO 7
  • 8-pin octal plug-in base, clear cover

Function

The coil is wired in series with the lamp. While the lamp is lit, the lamp current holds the relay energized (common–NO closed). If the lamp fails or the circuit is broken, the current stops, the relay drops out and the NC contacts close – typically used to trigger a lamp failure alarm or switch over to a stand-by lamp.

Connection diagram

CR-100V connection diagram

Diagram drawn from the marking on the relay case, shown de-energized.

Contact us for price and condition.