PULS

Manufacturers

Viewed products

New products

PULS ML30.106 power supply ±12 / ±15 V

ML30106

Used

PULS MiniLine ML30.106 dual-output DIN rail power supply, ±12 V or ±15 V DC, 36 W, 100–240 V AC input.

More details

Price on request

or call +47 908 92 500

Data sheet

Manufacturer PULS
Model MiniLine ML30.106 (dual output)
Manufacturers part number ML30.106
kW 0.036 kW (36 W total)
Other Efficiency 86 %, losses approx. 6 W; hold-up over 180 ms @ 230 V; ripple below 50 mVpp; OVP below 50 V; internal fuse T3.15 A; green LED DC ON; made in Czech Republic, label no. 322.920.06D
Weight 240 g
Amps Input 0.7–0.4 A; output ±12/±15 V 2 A (data sheet: +12 V 2.8 A / −12 V 1.4 A; +15 V 2.4 A / −15 V 1.4 A)
Volt Input 100–240 V AC (85–264 V AC, DC 85–375 V), 50–60 Hz; output DC ±12 V (link open) or ±15 V (link fitted), factory set ±15 V
Endurance MTBF 600 000 h (SN 29500, 36 W, 230 V AC, +40 °C)
Connection / terminals Spring clamp terminals: output + / Com / − (link for ±15 V), input PE / N / L; 0.3–2.5 mm² flexible, 0.3–4 mm² solid
Mounting DIN rail TS35/7.5 or TS35/15, snap-on
Standards / approvals GL (Germanischer Lloyd), cULus listed E137006, NEC Class 2, UL 508, IEC 60950 (CB), EN 50178, EN 60204, EN 61558-2-17, CE; SELV/PELV, IP20
Working temperature max, celsius degrees Operation −10 °C to +60 °C (label), up to +70 °C with derating; storage −25 °C to +85 °C
DIMENSIONs 45 × 75 × 91 mm (W × H × D, + DIN rail); depth incl. terminals 98 mm

More info

PULS MiniLine ML30.106 single-phase DIN rail power supply with dual (symmetrical) output – for analogue electronics, amplifiers and sensors that need a plus and minus supply. Output ±12 V with the link open or ±15 V with the link fitted (factory set ±15 V), adjustable on the front. Typical use in ship automation and instrument cabinets.

From the label

  • Power Supply, Dual Output – ML30.106
  • Input AC 100–240 V, 0.7 A, 50–60 Hz (operational range 85–264 V AC)
  • Output DC ±12 or ±15 V / 2 A, Pout max. 36 W, factory set ±15 V
  • Operational temperature −10 to +60 °C
  • Approvals: Germanischer Lloyd (GL), cULus listed IND. CONT. EQ., NEC Class 2 Supply, E137006; complies with IEC 60950 (CB), EN 50178, EN 60204, EN 61558-2-17; CE. Made in Czech Republic

Data sheet values (PULS ML30.106, May 2004)

  • Input also DC 85–375 V; internal fuse, no external fusing needed
  • Output current +12 V 2.8 A / −12 V 1.4 A, or +15 V 2.4 A / −15 V 1.4 A, total 36 W; no switch-off on overload (PULS Overload Design)
  • Efficiency 86 %, hold-up time over 180 ms at 230 V AC, MTBF 600 000 h
  • Spring clamp terminals, IP20, 45 × 75 × 91 mm, 240 g

Note: the PULS web shop lists this unit as «12 V, 2.5 A» – the unit itself is a ±12 / ±15 V dual-output supply.

Related: PULS ML70.100 24 V power supply.

Contact us for price and condition.