O.Øverland AS

Manufacturers

Viewed products

New products

O.Øverland UPC-3002 NMEA serial line splitter

upc3002

Used

O. Øverland UPC-3002 DNV approved NMEA serial line splitter: 2 inputs (A priority), 6 isolated RS-422 outputs, dual 15–30 V DC supply.

More details

Price on request

or call +47 908 92 500

Data sheet

Manufacturer O.Øverland AS
Model UPC-3002 serial line splitter / NMEA buffer, 2 inputs, 6 RS-422 outputs, DIN rail
Manufacturers part number UPC-3002
Alternative part number UPC3002-SLS; SLS 3002; UPC3002
Class Type approved: DNV
Other Inputs A/B: NMEA, RS-232, RS-422, RS-485, max. 115 200 baud; A priority, B backup. 6 RS-422 outputs. Galvanic isolation power/inputs/outputs. No decoding of sentences.
Weight 185 gram
Amps Outputs max. 50 mA each (RS-422), short-circuit protected
Volt Power supply main + secondary 15–30 V DC, 2 W each (front label 12–30 V DC)
Connection / terminals Screw terminals up to 1.5 mm²: power main/sec, input A/B (+/−), Tx1–Tx6 (+/−)
Mounting DIN rail module box
Standards / approvals DNV; EN 60945; IEC 61162-1 C4; IEC 61162-2 High Speed Data
DIMENSIONs L 130 × H 50 × W 80 mm

More info

O. Øverland AS (Molde, Norway) UPC-3002 «Serial Line Splitter» – DNV type approved NMEA buffer / distributor. Copies NMEA 0183 / IEC 61162 data from one of two inputs to six isolated RS-422 outputs. Several units in stock.

  • 2 inputs A and B (NMEA, RS-232, RS-422, RS-485, max. 115 200 baud) – input A has priority, input B is used only when A is idle
  • 6 outputs RS-422, max. 50 mA each, short-circuit protected
  • Dual power input main / secondary 15–30 V DC, 2 W each, automatic changeover
  • Galvanic isolation between power supply, inputs and outputs
  • Passes all sentences unchanged – no decoding of NMEA messages
  • LEDs for power, input A, input B and output
  • Marked EN 60945, IEC 61162-1 C4, IEC 61162-2 High Speed Data, DNV
  • Module box for DIN rail, L 130 × H 50 × W 80 mm, screw terminals up to 1.5 mm²

Installation notes (from the manual)

IEC 61162 signal A = «+», B = «−», C (ground) is not connected on the UPC. Each output drives one listener («single talker / single listener»). Use shielded CAT5E or better for long runs. Unused outputs should be terminated with a 120 Ω resistor between + and −.

Connection diagram

Power main and secondary 15–30 V DC; input A (priority) and B (backup); outputs Tx1–Tx6 RS-422. Drawn from the manufacturer manual.

O.Øverland UPC-3002 connection diagram

Contact us for price and condition.

Download

UPC-3002 manual

O. Øverland UPC-3002 serial line splitter – specifications and installation notes

Download (209.58k)