Air compressor

Viewed products

Cummins KTA50-G1 1000 kVA generator set
Cummins KTA50-G1 1000 kVA generator set
AK-6 Analog Expansion Unit
The AK-6 easily adds six more 4-20mA channels to the DCU 305 panels of...
MK-14 Relay Expansion Unit
The MK-14 is a compact relay expansion unit, with 14 relays on-board....
RK-66 Interface Module
This interface block is a mandatory requirement for each DCU 305...
DCU 305 A R1 / DCU 305 F R1 Engine Controller
The DCU 305 A R1 / DCU 305 F R1 is an electronic unit for control and...
DCU 105 Engine Controller
The DCU 105 is an electronic unit for control and monitoring of diesel...
DCU 205 Engine Controller
The DCU 205 is an electronic unit for control and monitoring of marine...
DCU 2217
The DCU 2217 is an electronic unit for control and monitoring of diesel...

View larger

Sperre HL2/90 air Compressor

Reference: 68644-sperre-hl2-90

Condition: Used

Manufacturer	Sperre
Model	HL2/90
Serial number	90563
kW	15,5 @ 50 Hz / 18,0 @ 60 Hz
RPM	1450 @ 50 Hz / 1750 @ 60 Hz
Volt	380 / 440 - see photo of electric motor plate
HZ	50 / 60
Class	DNV
m³ /h, cubic meter per hour capacity	35
Electric motor type	ABB Type M2AA 160 L 4
Working pressure BAR	30
Test Pressure BAR	45

Model HL2/90 is a two stage 90º V-compressor. ( typical data )

Cylinders and compressed air coolers are air-cooled. Cooling air is supplied by a well-dimensioned fan.

Bearings and cylinders walls are splash lubricated.

The compressor and motor are normally supplied mounted together on a foundation, and connected by means of a heavy-duty flexible coupling.

Technical Data
Performance	50 Hz (30 bar)		60 Hz (30 bar)
Speed (RPM)	975	1450	1175	1750
Charging capacity (m³/h)*	24	35	28	40
Power requirement (kW)	5,6	8,2	6,5	10,3
Heat dissipation (kCal/h)	4334	6346	5031	7972

*Charging capacity is from ambient pressure to final pressure. Tolerance +/-5%.
Design
No. of cylinders	2
Cylinder arrangement	90° V
No. of compression stages	2
Cooling	Air
Cooling system	Direct driven axial fan
Valve LP	Reed valve
Valve HP	Concentric plate valve
Dimensions & weight
Cylinder diameter LP	90 mm
Cylinder diameter HP	50 mm
Stroke	80 mm
Weight (compressor/el.motor)	255 kg

Lubrication
Oil type	Synthetic oil (see approved list)
Sump capacity	4 litres
Lubrication system	Splash
Operating parameters
Maximum delivery pressure	40 bar
Ambient temperature	45°C
Normal working pressure LP	3–4 bar
Normal temperature outlet air	15°C–30°C above ambient temperature
Maximum speed	1800 RPM
Set point thermo switch air alarm/stop	75°C/80°C
Rotation	Anti-clockwise (looking at the drive end)
Safety valves set point	5–10% above stage pressure
Max. noise level	84 dBA
Max. vibration level	40 mm/s-RMS